CoolCLAVE™ Laboratory Bench Top Sterilizer

• Rapid deodorizing and sterilization cycles of 8 minutes
• Fun and easy to use, with convenient cycle indicator and colorful chamber LEDs
• Stylish unit with small footprint but large chamber capacity
• Safe to use. No heat, liquid or corrosive chemicals; no damage or risk to any items
• Kills many types of bacteria, fungus, and viruses*
• Reliable, long lasting, and low power consuming unit
• Very little maintenance and no calibrations needed

NEW The First Ever Personal Lab Sterilizer!

CoolCLAVE™ is a unique - laboratory bench top sterilizer from Genlantis. It uses ozone gas to clean* laboratory tools, especially ones involved in sensitive experiments or assays. It is effective in sterilizing and deodorizing lightly contaminated pipettes, pipette tips, gloves, plates, small instruments, and even personal items such as keys and glasses. To sterilize items, simply place them inside the CoolCLAVE Sterilizer and press START. The anti-microbial properties of ozone provides a powerful sanitizing effect that is capable of killing more than 98% of most pathogenic organisms (bacteria, fungus, virus, etc.) in 8 minutes*. The antimicrobial properties of ozone also eliminate the odors produced by these organisms providing deodorizing effect. Best of all, the CoolCLAVE sanitizer is very safe and efficient, does not use any liquids, harmful UV rays, harsh chemicals, or heat, and does not damage any surfaces or leaves any chemical residues behind.

The CoolCLAVE is very easy to use. Its sterilizing action is able to penetrate into cavities or crevices that are unreachable by other methods, like ethanol spray or UV lamps, so your research tools or personal items are more thoroughly and safely cleaned*. Get the maximum protection against germs with the new and stylish CoolCLAVE from Genlantis, and do it with minimum effort and zero risk.

Ozone Radical System

Ozone gas is a strong oxidant and has multiple sanitary applications in various industries like pharmaceuticals, food and beverage, pulp and paper, waste water treatment, and many others. Ozone acts more rapidly, and more completely than other common disinfecting agents do. Ozone’s oxidative properties are sufficient to kill multiple micro-organisms on a variety of surfaces, and because of its relative short shelf life, ozone gas does not leave any residual contamination behind, and does not damage surfaces or products being sanitized. The Genlantis CoolCLAVE is the first ever laboratory bench top sterilizing instrument. The ozone gas it produces disrupts the cellular structures of contaminating bacterial cells and organisms and destroys these contaminants and the resulting odors they produce.

How the CoolCLAVE Works

- Ozone generator produces ozone gas
- Ozone gas is heated and pressurized to specified values
- Ozone gas produces high oxidation
- During each 8-minute cycle, sterilizing and deodorizing air is circulated in the CoolCLAVE chamber and further purified to remove contaminants and odor

Image 1: Ozone - Trioxygen Technology

Table 1: Sterilization after an 8-minute cycle

Image 2: E. coli sterilization after an 8-minute cycle in the CoolCLAVE

Effective and Safe Technology

The CoolCLAVE Sterilizer has a strong antifungal, antibacterial and deodorizing effect that kills organisms starting from an eight (8) minute cycle. An average 8 minute CoolClaving cycle will eliminate the vast majority of surface contaminants*. The CoolCLAVE’s sterilizing agent, ozone gas (O3), is safely converted to oxygen (O2) by passing through a number of internal filters. Furthermore, tests show that O3 leakage from the CoolCLAVE’s front door is less than 0.005 ppm, five times below OSHA’s Permissible Exposure Limit of 0.1 ppm.

SPECIFICATIONS
Electricity DC 12V / 550 mA
Dimensions (Width x Depth x Height) 12⅝ x 14⅞ x 9⅞ (320 x 375 x 250 mm)
Weight 14.1 lbs. (6.4 kg.)
Technology O3 generator
Operating cycle 8 minutes
Warranty 1 year

*Important Disclaimer
The Genlantis CoolCLAVE Personal Sterilizer is not a replacement or substitute for autoclaves, and should not be used to sterilize equipment for use in medical or surgical applications of any kind. The CoolCLAVE sterilizing cycles can eliminate most surface contaminants, especially bacterial and fungal, but only at lower densities that are typical in normal operating environments, such a lab benches or general surfaces. Genlantis makes no claims and offers no guarantees of any kind that a CoolCLAVE cycle(s) will eliminate 100% of all contaminants under all possible circumstances.

OPERATION

1. Plug power supply into wall outlet and connect it to the CoolCLAVE™ unit on the backside.
2. Open the door and put the objects you want to sterilize inside the unit. You can stack or put as many tools as you need, but do not overload unit so sterilizing can be effective.

NOTE: because the CoolCLAVE uses generated O3, you are able to safely and effectively sterilize the surfaces of most types of materials such as plastics, metals, paper products, pipet tip boxes, and even agar plates. On the other hand, the CoolCLAVE is not able to sterilize liquids or solutions.
3. Close the CoolCLAVE door and press the "Start" button on the face of the unit.
a. For each press of the Start button, the CoolCLAVE will run an 8 minute sterilizing cycle.
b. The green light bar next to the Start button will visually indicate the time left for each 8 minute cycle.
c. An 8 minute cycle is typically sufficient for a few lightly contaminated items. For heavier loads or further cleaning, press the Start button again to start another 8 minute cycle. It is recommended that in general you run the CoolCLAVE 2-3 cycles for the best cleaning effectiveness.
d. During operation internal LED lights will flash and change color to show that the unit is in working mode.
e. If during an operating cycle you open the CoolCLAVE door, the unit will stop working. Pressing the Start button again, after closing door, will restart the 8 minute cycle from the beginning.

MAINTENANCE

1. The CoolCLAVE has a small filter cartridge that needs occasional cleaning every 3 months. The cartridge is located on the inside of the unit, towards the back right side. Remove the cartridge by sliding it out of its holding cage and clean it by using air gun or vacuum cleaner to remove dust particles. Avoid damaging the cartridge�s fabric cover by using moderate air pressure or a soft vacuum brush head. Alternatively, you may just shake the dust off of the filter in an outdoor area, or use a dry soft brush to remove dust and particles.
2. Keep you CoolCLAVE unit clean at all times by wiping the interior and exterior surfaces with a moist towel. To avoid damaging the unit, do not use any detergents or solvents.
3. Unplug the power supply from the wall outlet when the CoolCLAVE is in storage or will not be used for extend periods of time.
4. Avoid obstructing the back of the unit by leaving a space of about 2 inches between it and a wall surface.
5. Avoid damaging the unit by putting heavy objects on top of it.

PRECAUTIONS

1. Read all instructions before using the appliance. Use this appliance only for its intended use as described in this manual.
2. This appliance must be used ONLY with the provided power supply; do not use any substitutes to avoid damage to unit.
3. Do not attempt to operate the CoolCLAVE with the door open. Do not tamper with the door seal or latch mechanism.
4. The CoolCLAVE unit emits small amounts of O3 gases. Even though small ozone emissions are not considered hazardous, we recommend users avoid inhaling the gases that emanate from the CoolCLAVE after opening the door upon completion of sanitization cycle(s).
5. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.
6. Do not store this appliance outdoors, or use it near water� for example near sinks or water baths.
7. Do not immerse cord or plug in water; keep cord away from heated surfaces.
8. Do not attempt to repair or open the unit unless you are a qualified repair technician.

NEW CoolCLAVE™ is a unique and innovative laboratory bench top sterilizer from Genlantis. It uses O3 or trioxygen, to sterilize laboratory tools, especially ones involved in sensitive experiments or assays, It is effective to sterilize pipettes, pipette tips, gloves, plates, small instruments and even personal items such as keys and glasses. To sterilize tools, users simply place items inside the CoolCLAVE sterilizer and press START.

Items shown are for demonstration purposes and are not included with the CoolClave unit.